What do you need:
- worbla's Finest Art (leftover pieces)
- head dryer
- acrylic paint/ spray (if you want to paint it later)
- silicone mold (for stones etc.)
Time for our lovely magic weapon: the ultimate heat pistol!
Heat up your Worbla's until it gets soft and shapeable. Shape it to a ball or something similar.
You have to heat it for a couple of times until you reach this shape.
Tip: it is TOO hot when your worbla's is brighter/white and rough.
With silicone mold:
Press the Worbla's ball into the mold or bend it freehand. Wait until it gets cold and solid again.
If you used too much material, remove it from the mold, take away some of the plastic and press it back into the form again.
With sculpture tools and the heat gun you can knead/shape your model step by step.